Physical & Chemical test capability

2019/9/24

No.	Item	Standard
1	RoHS	IEC 62321-2008 Procedures for the Determination of Levels of Six Regulated Substances(Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls, Polybrominated Diphenyl Ethers) in Electrotechnical Products SJ/T 11365-2006Testing methods for hazardous substances in electronic information products
2	smoke density	IEC 61034: 2005 Measurement of smoke density of cables burning under defined conditions GB/T 17651.1～17651.2-1998 Measurement of smoke density of cables burning under defined conditions ASTM E 662-2009 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
3	Toxicity Index	NES 713:2000 Determination Of The Toxicity Index Of The Products of combustion From Small Specimens Of Materials JB/T 10707-2007 Low-smoke halogen-free thermoplastic compounds for flame retardant cables
4	Halogen acid gas	GB/T 17650.1-1998 Test on gases evolved during combustion of materials from cables Part 1: Determination of the amount of halogen acid gas GB/T 17650.2-1998 Test on gases evolved during combustion of materials from cables Part 2: Determination of degree of acidity of gases by measuring pH and conductivity IEC 60754-1:1994 Test on gases evolved during combustion of materials from cables – Part 1: Determination of the amount of halogen acid gas IEC 60754-2:1994 Test on gases evolved during combustion of electric cables – Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity
5	Carbon black content	GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41: Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis (TGA)-Assessment of carbon black dispersion in polyethylene using a microscope IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope
6	Oxygen index	GB/T 2406.1-2008 Plastics-Determination of burning behavior by oxygen index-Part 1:Guidance ISO 4589-1:1996 Plastics-Determination of burning behavior by oxygen index-Part 1:Guidance GB/T 2406.2-2009 Plastics-Determination of burning behavior by oxygen index-Part 2:Ambient-temperature test ISO 4589-2:1996 Plastics-Determination of burning behavior by oxygen index-Part 2:Ambient-temperature test
7	Oxidative inductive time	ASTM D 4565-99 Standard Test Methods for Physical and Environmental Performance Properties for Insulation and jackets for telecommunication wire and cable GB/T 2951.37-94 Test method for determining mechanical and physical properties of electric cables and wire Test for oxidative inductive time JB/T 10696.8-2007 Test methods for determining mechanical, physical and chemical properties of electric cables and wires – Part 8: Test for oxidative inductive time
8	Circuit integrity	IEC 60331-11: 2009 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus – Fire alone at a flame temperature of at least 750℃ IEC 60331-21: 2009 Tests for electric cables under fire conditions - Circuit integrity – Part 21: Procedures and requirements – Cable of rated voltage up to and including 0.6/1.0kV IEC 60331-23: 2009 Tests for electric cables under fire conditions - Circuit integrity – Part 23: Procedures and requirements – Electric data cables IEC 60331-25: 2009 Tests for electric cables under fire conditions - Circuit integrity – Part 25: Procedures and requirements – Optical fibre cables GB/T 19216.11-2003 Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus – Fire alone at a flame temperature of at least 750℃ GB/T 19216.21-2003 Tests for electric cables under fire conditions – Circuit integrity – Part 21: Procedures and requirements – Cable of rated voltage up to and including 0.6/1.0kV GB/T 19216.23-2003 Tests for electric cables under fire conditions – Circuit integrity - Part 23: Procedures and requirements – Electric data cables GB/T 19216.25-2003 Tests for electric cables under fire conditions – Circuit integrity - Part 25: Procedures and requirements – Optical fibre cables
9	Carbon black dispersion	GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41: Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis (TGA)-Assessment of carbon black dispersion in polyethylene using a microscope IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
10	Density	GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13: Method for general application – measurement for determining the density – water absorption tests –shrinkage test IEC 60811-1-3: 2001 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13:Methods of general application- Measurement for determining the density-water absorption tests- Shrinkage test
11	Pressure test at high temperature	GB/T 2951.31-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 31: Methods specific to PVC compounds-Pressure test at high temperature-Test for resistance to cracking IEC 60811-3-1-am2 ed1.0(2001-05) Amendment 2 - Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high temperature - Tests for resistance to cracking compounds-Pressure test at high temperature-Test for resistance to cracking IEC 60189-1:2007 Low- frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods ASTM D 4565-99(2004) Standard Test Methods for Physical and Environmental Performance Properties for Insulations and Jackets for Telecommunications Wire and Cable
12	Loss of mass test	GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 32:Methods specific to PVC compounds-Loss of mass test-Thermal stability test IEC 60811-3-2-am2 ed1.0(2003-12) Amendment 2 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test
13	Shrinkage test	GB/T 2951.13-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 13: Methods of general application- Measurement for determining the density-water absorption tests- Shrinkage test IEC 60811-1-3 ed2.1 Consol. with am1(2001-07) Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test
14	Liquidity test	GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods IEC 61196-1:2005 Coaxial communication cables – Part 1: Generic specification – General, definitions, requirements
15	Dimension stability	GB/T 17737.1-2000 Radio-frequency cables Part 1:Generic specification-General, definitions, requirements and test methods IEC 61196-1:2005 Coaxial communication cables – Part 1: Generic specification – General, definitions, requirements
16	Flame test	GB/T 18380.11-2008 Tests on Electric and optical fibre cables under fire conditions – Part 11: Test for vertical flame propagation for a single insulated wire or cable – Apparatus GB/T 18380.12-2008 Tests on Electric and optical fibre cables under fire conditions – Part 12: Test for vertical flame propagation for a single insulated wire or cable –Procedure for 1kW pre-mixed flame GB/T 18380.21-2008 Tests on Electric and optical fibre cables under fire conditions – Part 21: Test for vertical flame propagation for a single insulated wire or cable –Apparatus GB/T 18380.22-2008 Tests on Electric and optical fibre cables under fire conditions – Part 11: Test for vertical flame propagation for a single insulated wire or cable –Procedure for diffusion flame GB/T 18380.13-2008 Tests on Electric and optical fibre cables under fire conditions – Part 13: Test for vertical flame propagation for a single small insulated wire or cable –Procedures for determination of flame droplets/particles UL 1581 Reference Standard for Electrical Wires, Cables, and Flexible Cords(Vertical-Tray Fire-Propagation except Smoke-Release Test) UL 1685-2007 UL Standard for Safety Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables Third Edition; Reprint with revisions through and including December 5, 2007 IEC 60332-1-1: 2004 Tests on electric and optical fibre cables under fire conditions-part 1-1: Test for vertical flame propagation for a single insulated wire or cable- Apparatus IEC 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions-part 1-2: Test for vertical flame propagation for a single insulated wire or cable-Procedure for 1kW Pre-mixed flame IEC 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions- part 1-3:Test for vertical flame propagation for a single insulated wire or cable- procedure for determination of flaming droplets /particles IEC 60189-1:2007 Low- frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods IEC 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions- part 2-1:test for vertical flame propagation for a single small insulated wire or cable- Apparatus IEC 60332-2-2:2004- Tests on electric and optical fibre cables under fire conditions- part 2-2:test for vertical flame propagation for a single small insulated wire or cable- procedure for diffusion flame UL 1581-2008 Reference Standard for Electrical Wires Cables and Flexible Cords(VW-1, FT1, FT2)
17	Flame spread of bunched	GB/T 18380.33-2008 Tests on electric and optical fibre cables under fire conditions- part 33:Test for vertical flame spread of vertically-mounted bunched wires or cables—Category A GB/T 18380.34-2008 Tests on electric and optical fibre cables under fire conditions- part 34:Test for vertical flame spread of vertically-mounted bunched wires or cables—Category B GB/T 18380.35-2008 Tests on electric and optical fibre cables under fire conditions- part 35:Test for vertical flame spread of vertically-mounted bunched wires or cables—Category C GB/T 18380.36-2008 Tests on electric and optical fibre cables under fire conditions- part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D IEC 60332-3-22: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A IEC 60332-3-23: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B IEC 60332-3-24: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C IEC 60332-3-25: 2009 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
18	Melt flow index	GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope ASTM D 4565-99（2004）Standard Test Methods for Physical and Environmental Performance Properties for Insulations and Jackets for Telecommunications Wire and Cable
19	Thickness of metallic coatings	JB/T 3135-1999 Silver coated annealed copper round wires
20	Continuity of coating	GB/T 4909.9-2009 Test method for bare wires-Part 9 : Test for continuity of coating- Sodium polysulfide solution method
21	Adherence of coating	GB/T 4909.11-2009 Test method for bare wires -Part 11: Test for adherence of coating
22	Solderability test of coating	GB/T 2423.28-2005 Environmental testing for electric and electronic products- Part2:Test methods- Test T:Soldering IEC 60068-2-20 ed5.0(2008-07)Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
23	Lower temperature brittleness	GB/T 5470-2008 Plastics—Determination of the brittleness temperature by impact ISO 974: 2000 Plastics—Determination of the brittleness temperature by impact ASTM D 746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
24	vibration、shock	GB/T 2423.43-2008 Environmental testing for electric and electronic products-Part 2: Test methods - Mounting of specimens for vibration，impact and similar dynamic tests IEC 60966-1-1999Radio frequency and coaxial cable assemblies - Part 1:Generic specification - General requirements and test methods IEC 60068-2-47: 2005 Environmental testing - Part 2-47: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests
25	Bump	GB/T 2423.6-1995 Environment testing for electric and electronic products Part 2:Test methods Test Eb and guidance: Bump IEC 68-2-29: 1987 Basic Environmental testing procedures Part 2: Tests-Test Eb and guidance: Bump IEC 60966-1-1999Radio frequency and coaxial cable assemblies - Part 1:Generic specification - General requirements and test methods
26	Thermal stability test	GB/T 2951.32-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 32:Methods specific to PVC compounds-Loss of mass test-Thermal stability test IEC 60811-3-2: 1985 Common test methods for insulating and sheathing materials of electric and optical cables-Part 32:Methods specific to PVC compounds-Loss of mass test-Thermal stability test
27	Environmental stress cracking	GB/T 2951.41-2008 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope IEC 60811-4-1: 2004 Common test methods for insulating and sheathing materials of electric and optical cables-Part 41:Methods specific to polyethylene and polypropylene compounds-Resistance to environmental stress cracking-Measurement of the melt flow index-Carbon black and/or mineral filler content measurement in polyethylene by direct combustion-Measurement of carbon black content by thermo gravimetric analysis(TGA)-Assessment of carbon black dispersion in polyethylene using a microscope